The pressure automatically adjusts the end clearance, so the pressure of the pump is stable, the output flow rate is small, the pulsation is small, and the solution volume is high. The unit should be installed on a horizontal cement foundation and fixed with anchor bolts.
. The right coupling should be installed coaxially and then rotate the coupling to confirm that the operation is smooth and there is no negative pressure before it can start operation.
The pump is not suitable for transporting unclean oil, so an oil filter should be installed at the inlet pipe end.
If the pump does not have a safety valve, it is recommended to install a safety valve in the oil discharge pipeline to ensure safe operation of the system.
The installation height of the pump shall not exceed the allowable suction height.
. Pump steering regulations: The direction of rotation when viewed from the pump end to the motor is counterclockwise.
Precautions for working with gear pumps
Before starting up, all valves on the oil suction and discharge pipelines should be opened and the couplings run to see if there is any sticking or abnormality before the installation can be recognized as qualified
=#ddddd=r =# d %> ==# %> Model
=# Flow rate
==# %> Speed
/
==# %> Discharge pressure
==# = %> Necessary steam
Erosion allowance
)
==# = %> Efficiency
%
=# Motor
= # %> /
=# %> /
=# = %> Power
=# = %> Model
=# => -./
=# >
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#> -./
=#>
=#>
=#>
=#>
=#>
= #>
=#>
=#>
=#>
=#>
=#>
=#>
=# >
=#>
=#>
=#>
=#>
=#> -./
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
= #> -./
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
=#>
2CY gear pump, 2CY stainless steel gear pump-Beihong Pump Industry specializes in production